EPSON Stylus Pro GS6000
User’s Guide
Maintenance and Move or Transportation
71
Setting up the printer after moving
After moving the printer, follow the procedure
below to set it ready for use.
A
Make sure that the place is proper.
See
Unpacking and Setup Guide
B
Plug in the power cable to the electrical
outlet, and turn on the printer.
See
Unpacking and Setup Guide
C
Perform a nozzle check to see if there are
any missing dots.
D
Perform the print head alignment to ensure
print quality.
See “Print head alignment” on page 47
Transporting the printer
When transporting the printer, the printer must
be packed in the same condition as purchased.
Contact your local Epson customer support.
c
Caution:
When moving or transporting the printer, keep it
flat. Do not tilt it, stand it on end, or turn it
upside down. Doing so may cause the ink to leak
inside the printer. Also, proper operation of the
printer after moving or transportation cannot be
guaranteed.
