EPSON Stylus Pro GS6000
User’s Guide
Product Information
91
Standards and Approvals
Interface
Your printer is equipped with a USB interface and
an Ethernet interface.
USB interface
The printer’s built-in USB interface is based on the
standards specified in the Universal Serial Bus
Specifications Revision 2.0 and the Universal
Serial Bus Device Class Definition for Printing
Devices Version 1.1. This interface has the
following characteristics.
Ethernet interface
The printer has a built-in Ethernet interface. Use a
100BaseTX and 1000BaseT STP (shielded
twisted-pair) cable via the RJ-45 connector to
connect to a network.
Type of STP cable
For 1000Base T, use category 5e or above.
For 100Base TX, use category 5 or above.
Safety
UL 60950-1
CSA No. 60950-1
Low Voltage
Directive
2006/95/EC
EN 60950-1
EMC
FCC part 15 subpart B class A
CAN/CSA-CEI/IEC CISPR 22 Class A
AS/NZS CISPR 22 Class A
EMC Directive
2004/108/EC
EN 55022
Class A
EN 55024
EN 61000-3-2
EN 61000-3-3
w
Warning:
This is a class A product. In a domestic
environment this product may cause radio
interference in which case the user may be
required to take adequate measures.
Standard
Based on Universal Serial
Bus Specifications Revision
2.0, Universal Serial Bus
Device Class Definition for
Printing Devices Version 1.1
Bit rate
480 Mbps (High Speed
Mode)
12 Mbps (Full Speed
Device)
Data encoding
NRZI
Adaptable
connector
USB Series B
Note:
Only computer equipped with a USB connector and
running Windows Vista, XP x 64, XP, 2000, or
Mac OS X.10.x support the USB interface.
