![background image](/i/jaguar/82691/jaguar-087-dw/h/jaguar-087-dw-042.png)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
ENGLISH
ADJUSTING STITCH LENGTH
Turn the stitch length dial until the required length is reguired.
The higher the number, the longer the stitch. This dial can adjust the stitch length from 1 to 5 mm.
ADJUSTING OVEREDGE CUTTING WIDTH
Overedge cutting width can be adjusted from 4 to 7 mm by simply turning overedge cutting width
dial according to the kind of fabric.
It is set at standard width of 6 mm
when delivered from the factory.
Turn it towards ¢5¢ if fabric edge curls while sewing. (Fig. 1)
Turn it towards ¢7¢ if loops hang off the edge. (Fig. 2)
Stitch finger (B)
Loops may hang off the edge, when you sew with lightweight fabric using 3 threads (right needle
only), and setting cutting width dial at 4 - 5 (Fig. 3). In such a case change the stitch finger (A) to (B)
to get neat stitching (Fig. 4).
Illustration *
: Stitch length dial
*
: Overedge cutting width dial
*
: Stitch finger (B)
*
: Cross section
40
1
2
*
*
*
*