![background image](/i/jaguar/82691/jaguar-087-dw/h/jaguar-087-dw-068.png)
ENGLISH
GATHERING/SHIRRING FOOT
1. Tension settings for gathering:
Left needle
4
Differential feed 2.0
Right needle
4
stitch length
4
Upper looper
4
Lower looper
4
2. Replace regular presser foot with gathering foot.
3. Clip both fabric layers approximately 5/8"(1.5 cm.) inside and 1 1/2"(4 cm.) down.
Lift front of presser foot to place fabric.
4. Place fabric to be gathered underneath the presser foot. Place fabric which will remain straight
between presser foot and lower metal piece. Push clipped portion through slot in foot. Lower
presser foot.
5. Turn handwheel to make 4 - 5 stitches in the fabric, making sure to catch both upper and lower
layers.
6. Serge. Use both hands to guide fabric, one on the under layer of fabric. Keep in mind that the
lower piece of fabric will move faster as it is gathering than the top piece.
Illustration
: Fabric to be straight
: Fabric to be gathered
66