ENGLISH
NEEDLE THREADER
1. Feed the thread through the thread guide of needle clamp
as illustrated. Raise the presser foot. Raise the needle bar to
highest position, and pull the thread leaving about 4 (10
cm) clear.
2. Lower the presser foot. set the needle threader ensuring the
hooking fork enters into the needle hole.
3. Hold the thread with the needle threader with your hand.
4. Guide the thread into hooking fork and pull the thread with
your another hand.
5. Move the needle threader backwards slightly. Then release
the hand which is pulling the thread.
6. Take the needle threader off the needle clamp.
7. Pull the thread away from you.
68
4
2
1
3
4
5
3
2
1
5