![background image](/i/jaguar/82691/jaguar-087-dw/h/jaguar-087-dw-008.png)
ENGLISH
SETTING UP YOUR MACHINE
1.
Wipe off excess oil in the needle plate and bed areas.
2. FOOT CONTROL
Push foot control plug into connector socket, and connect the power line plug into power supply
outlet.
3. POWER/LIGHT SWITCH
Your machine will not operate unless the power/light switch is turned on. This same switch
controls both machine power and sewing light.
When leaving the machine unattended, or servicing the machine, remove the power line plug
from supply outlet.
4. OPENING FRONT COVER
To open front cover, pull it to the right and down towards you.
POLARIZED PLUGS CAUTION
(USA only)
This product is equipped with a polarized alternating current line plug (a plug having one blade
wider than the other). This plug will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug
should still fall to fit, contact an electrician to replace the obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
Use Yamamoto Electric, Model YC-482E with this sewing machine model 087.
5. OPENING WORKING TABLE
To open working table, pull the release lever towards you with your right hand, and lift the front
of presser foot up with your left hand.
Illustration *
: Connector socket
*
: Power/light switch
*
: Release lever
*
: Working table
*
: Front cover
6
*
*
*
*
*