Installation
15
3
Ins
talla
tion
G
ALARM OUT [NC2]
Blue
H
NC
Brown
PORT B of the LW9228I/9226I series
Description
Color
ALARM OUT [NC1]
Blue
ALARM OUT [COM1]
Violet
ALARM OUT [NO1]
Brown
NC
ALARM OUT [NC2]
Gray
ALARM OUT [COM2]
Orange
ALARM OUT [NO2]
Black
NC
PORT B of the LW9228/9226 series
Description
Color
ALARM OUT [NO1]
White Blue
ALARM OUT [COM1]
Beige
ALARM OUT [NC1]
Black
NC
ALARM OUT [NO2]
Brown
ALARM OUT [COM2]
Red
ALARM OUT [NC2]
Orange
NC
CAUTION
Output specifications are lowactive, open-collector and
a drive capacity of 30 V DC 0.5 A maximum.
Connecting the alarm out incorrectly may cause
damaging the camera.
Connecting Network
You can control and monitor the system via network.
With the remote control (monitoring), you can change
the system configuration or monitor the image via net-
work. After the installation, check the network settings
for the remote control and monitoring work.
Connect the IP camera to your network using a standard
RJ-45 network cable as shown below.
