Operation and settings

31

4

Oper

ation and se

ttings

Date & Time

Time zone

Set the time difference from GMT in the area where the IP 
device is installed. 
Select the time zone in the area where the IP device is 
installed from the drop down list.

Time mode

 › Synchronize with NTP Server: Select if you want 

to synchronize the IP device’s date and time with 
those of the time server called NTP (Network Time 
Protocol). Specify the NTP server’s name. Click the 
[Test] button for connection test to the server.

 › Synchronize with personal computer: Select if you 

want to synchronize the IP device’s date and time 
with your computer.

 › Synchronize manually: Select if you want to set the 

IP device’s date and time manually. Select the year, 
month and date by clicking the calendar button. 
Set hour, minutes and seconds in the edit boxes.

Server time

 › Server time: Displays the current date and time of 

the IP device.

•  Save: Click this button to confirm the settings.

Maintenance

System reboot 

Click the [Reboot] button to restart the IP device. It takes 
some minutes for the IP device to start again.

Restore and backup

 › Backup: To take a backup all of the settings. If 

necessary, it make possible to return to a backuped 
configuration. Click this button and follow the 
instructions on the browser to specify the folder 
and save the setting data of the IP device. This 
configuration backup can be restored whenever 
needed.

 › Restore: 

1.  Click the [Browse] button. 
2.  Find and open the file in which the configura-

tion setting data is stored. 

3.  Click the [Upload] button. 
4.  Click the [Restore] button after successfully 

uploading the backup configuration. The sys-
tem settings will be restored and reboot the 
system.

  NOTE

•  Backup and Restore can happen on IP 

device having the same version of firmware. 
This feature is not intended for multi-
configurations or for firmware upgrades.

•  [Backup] function is allowed in HTTP protocol 

but not in HTTPS protocol.