Operation and settings

49

4

Oper

ation and se

ttings

-

D/N LEVEL: Use   or   button to select a level.

-

DWELL TIME: Use   or   button to select a 
dwell time. 

NOTE

If you set the AGC to [OFF] or the SHUTTER is set to one 
of the SHUTTER options except AUTO on the [EXPOSURE] 
menu, the AUTO mode of the DAY/NIGHT function is not 
available and [---] mark is displayed.

•  DAY: Color mode enabled.
•  NIGHT: Black-and-white mode enabled.

3D-DNR setting

1.   Select the [3D-DNR] option. If pictures are not clear due 

to brightness, use this function to reduce the noise of 
picture.

2.   Use   or   button to select an option.

  NOTE

•  If you set the AGC to [OFF] on the [EXPOSURE] menu, 

the [3D-DNR] function is not available. 

•  When you use this function, the afterimage may 

occur.

Color setting

You can switch the displayed picture to grayscale or color.

1.   Select the [COLOR] option on the [CAMERA SET] menu.
2.   Use   or   button to change a color effect.

•  ON: To display the picture with color. Select ON and 

press   to display the submenu. You can adjust 
the color level using the   or   button.

•  OFF: To display the picture with grayscale.

Sharpness setting

Sharpens the image outline.

1.   Select the [SHARPNESS] option on the [CAMERA SET] 

menu.

2.   Use   or   button to adjust the option. If you set the 

sharpness value to higher, the image outline becomes 
sharp. If you set to lower value, the image outline 
becomes dim.