4

Safety Information

1

Saf
et

y Inf

orma

tion

IMPORTANT SAFETY 

INSTRUCTIONS

1.  Read these instructions.
2.  Keep these instructions.
3.  Heed all warnings. 
4.  Follow all instructions. 
5.  Do not use this apparatus near water. 
6.  Clean only with dry cloth. 
7.  Do not block any ventilation openings. Install in 

accordance with the manufacturer’s instructions. 

8.  Do not install near any heat sources such as radiators, 

heat registers, stoves, or other apparatus (including 
amplifiers) that produce heat. 

9.  Do not defeat the safety purpose of the polarized or 

grounding-type plug. A polarized plug has two blades 
with one wider than the other. A grounding type plug 
has two blades and a third grounding prong. The wide 
blade or the third prong are provided for your safety. If 
the provided plug does not fit into your outlet, consult 
an electrician for replacement of the obsolete outlet.

10.  Protect the power cord from being walked on or 

pinched particularly at plugs, convenience receptacles, 
and the point where they exit from the apparatus.

11.  Only use attachments/accessories specified by the 

manufacturer.

12.  Use only with the cart, stand, tripod, bracket, or 

table specified by the manufacturer, or sold with the 
apparatus. When a cart is used, use caution when 
moving the cart/apparatus combination to avoid injury 
from tip-over.

13.  Unplug this apparatus during lightning storms or when 

unused for long periods of time.

14.  Refer all servicing to qualified service personnel. 

Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or 
plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has been 
exposed to rain or moisture, does not operate normally, 
or has been dropped.

Safety Precautions

•  Do not attempt to disassemble the camera  

To prevent electric shock, do not remove screws or 
covers. There are no user serviceable parts inside. Ask a 
qualified service personnel for servicing.

•  Avoid the camera with direct sunlight  

Do not aim the camera at bright objects.Whether the 
camera is in use or not, never face it with direct sunlight 
or other extremely bright objects. Otherwise blooming 
or smear may be caused.

•  Handle the camera with care  

Do not abuse the camera. Avoid striking, shaking, etc. 
The camera could be damaged by improper handling 
or storage.

•  Do not use strong solvents or detergents  

Use a dry cloth to the camera when it is dirty. If it is 
hard to remove the dirt on the camera, use a mild 
detergent and wipe it gently.

•  Do not install this camera upside down  

This camera is designed for mounting on the ceiling or 
wall. If you install this camera upside down, for example, 
mounted on the floor, it may cause malfunction.

•  Do not use the camera in such places as shown below. 

The lens may become cloudy due to condensation if 
the camera is used under the following conditions.

 › Rapid temperature fluctuation by switching an air 

conditioner on and off.

 › Rapid temperature fluctuation due to frequent 

door opening and closing.

 › Use in an environment where eyeglasses become 

foggy.

 › Use in a room filled with cigarette smoke or dust. 

If the lens becomes cloudy due to condensation, 
remove the dome cover and wipe all moist surfaces 
with a soft cloth.