Инструкция для LG LW9228

(скачивание инструкции бесплатно)
Формат файла: PDF
Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.
Дополнительно: Чтение инструкции онлайн
background image

36

Operation and settings

4

Oper

ation and se

ttings

 

»

How to set the motion detect window

1.   Click the [Add] button. The motion detect window 

is displayed. You can add the five windows maxi-
mum for motion detection area.

2.   Set the [Sensitivity] option.
3.  Click the edge or coner of the window box to 

adjust the window size for motion detection.

4.   Click the [Save] button to save the settings.

  NOTE

•  You can reset the window size. Click one of 

the window edge or corner and drag & drop 
to reset the motion detection area.

•  Motion Detection can be activated when the 

Master channel is enabled and Video codec 
is set to H.264.

Network settings

Basic

General

 › MAC address: Displays the MAC address.

Port & Encryption

 › Web port: The default HTTP port number (80) can 

be changed to any port within the range 1 025 to 
65 535. 

 › RTSP port: Check RTSP port. The default port is 554. 

Other ports can be selected within the range  
1 025 to 65 535.  

 › Network encryption: Select the HTTP or HTTPS 

option for security.

  NOTE

The RTSP port number should not be same with 
the web port number.

TTL

 › TTL: This option indicates the Time-To-Live of 

multicast packets. The default setting is 7, and the 
allowed TTL range is from 1 to 255.  

ARP Ping

 › Enable ARP Ping to configure IP address: Check to 

enable ARP ping.

•  Save: Click this button to confirm the settings.

RTP stream

RTP (Real-time Transport Protocol) is an internet protocol 
that allows programs to manage the real-time transmission 
of multimedia data, via unicast or multicast.

Master / Slave

 › RTP unicast: When enabled the transmission of 

the data to the specified equipment happens on a 
network specifying a single address.

 › RTP multicast: When enabled it reduces the 

transmission load on the camera by making the 
computer of the same segment network receive 
the same transmission data. When multicast option 
is checked then select Video Port number, Audio 
Port number and Data port number.

 - Video RTP port: Specify the video transmission 

port number used for the multicast streaming. 
It is initially set to 8 888 and you can edit this 
between 1 025 and 65 534.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60