![background image](/i/sony/169466/sony-dvp-s725d/h/sony-dvp-s725d-011.png)
11
Getting Started
This player conforms to the PAL color system.
When you play a disc recorded in the NTSC
color system, the player outputs the video
signal or the setup display etc. in the NTSC
color system and the picture may not appear
on the TV screen. In this case, open the disc
tray and remove the disc.
Setups for the player
Some setups are necessary for the player depending on
the TV or other components to be connected.
Use the setup display to change the various settings.
For details on using the setup display, see page 49.
•
To connect the player to a wide-scr
een TV
In the setup display, set “TV TYPE” in “SCREEN
SETUP” to “16:9” (default setting). For details, see
page 53.
•
To connect the player to a normal TV
In the setup display, set “TV TYPE” in “SCREEN
SETUP” to “4:3 LETTER BOX” or “4:3 PAN SCAN.”
For details, see page 53.
•
To connect the player to a TV or VCR via EURO
AV
connector that conforms to the S video signals or
RGB signals
In the setup display, set “EURO AV OUT” in “CUSTOM
SETUP” to “S VIDEO” or “RGB.” For details, see page
54.
• To connect the player to a monitor or pr
ojector with
component video input connectors that conform to
output signals fr
om the COMPONENT VIDEO OUT (Y ,
CB/B-Y , CR/R-Y) connectors on the player
In the setup display, set “COMPONENT OUT” in
“CUSTOM SETUP” to “ON.” This is default setting.
For details, see page 54.