![background image](/i/sony/169466/sony-dvp-s725d/h/sony-dvp-s725d-020.png)
20
Playing Discs
Resuming Playback from
the Point Where You
Stopped the Disc (Resume
Play)
The player stores the point where you stopped the disc
and if “RESUME” appears on the front panel display. You
can resume playback from that point.
As long as you do not open the disc tray, Resume Play is
available even if you turn the power off.
1
While playing a disc, press
p
to stop playback.
“RESUME” appears in the front panel display and
“When playing next time, disc restarts from point you
stopped.” appears on the TV screen.
If “RESUME” does not appear, Resume Play is not
available.
2
Press
·
.
The player starts playback from the point where you
stopped the disc in Step 1.
z
To play from the beginning of the disc
When the playing time appears on the front panel display before
you start playing, press
p
to reset the playing time, then press
·
.
p
·
Playing at Various Speeds/Frame by Frame
p
·
To play the disc frame by frame changing
the playback speed (Jog mode)
1
Press JOG.
JOG lights up during jog mode. When you press JOG
on the player, it pauses.
2
Turn the click shuttle.
Depending on the turning speed, the playback goes to
frame-by-frame in the direction that the click shuttle is
turned. If you turn the click shuttle with constant
speed for a while, the playback speed goes to slow or
normal.
To return to Continuous Play
Press
·
.
Notes
• The JOG indicator shows the mode of the corresponding click
shuttle. For example, when the JOG indicator on the remote is
not lit, the remote click shuttle will remain in the shuttle mode
even if the indicator on the player is lit.
• If you don‘t operate the click shuttle for about 20 seconds after
pressing JOG, it returns to shuttle mode on the remote. On the
player, it stays in jog mode.