54

Settings and Adjustments

PICTURE
MEMORY

4

7

5

8

0

6

9

Custom Settings (CUSTOM
SETUP) 

Z

CUSTOM SETUP

AUTO PLAY:
DIMMER:
PAUSE MODE:
BOOKMARK RESET 
PARENTAL CONTROL
PLAYBACK MEMORY:

To set, press                , then            .
To quit, press            .

OFF

EURO AV OUT:

VIDEO

COMPONENT OUT:

ON

BRIGHT

AUTO

ON

ENTER

SETUP

Storing the picture in memory

During playback, when you find the scene to be
stored in memory, press PICTURE MEMORY on the
remote.

The picture is stored in memory.

Notes

• The player can store in memory only one scene.  The stored

picture appears in both the background and the startup screen.

• When the picture is stored in memory by pressing PICTURE

MEMORY,  the picture stored before is not retained in memory.

• When you operate this player during storing picture in

memory, the picture does not be stored in memory.

Settings for Display (SCREEN SETUP)

Select “CUSTOM SETUP” after pressing SET UP.
 “CUSTOM SETUP” allows you to set the playback
conditions.
Default settings are underlined.

p

COMPONENT OUT

Selects the methods of outputting video signals from the
COMPONENT VIDEO OUT (Y, C

B

/B-Y, C

R

/R-Y)

connectors on the rear panel of the player.
When you select “ON,” you need to connect the monitor
or projector via EURO AV, VIDEO OUT or S VIDEO OUT
beforehand.
• OFF: outputs no signals.
• ON: outputs the component video signals.

Notes

• When you set “EURO AV OUT” to “RGB”, you cannot set

“COMPONENT OUT” to “ON.”

• When you connect the player to a monitor or projector via only

the  COMPONENT VIDEO OUT connectors,  do not select
“OFF.”  If you select “OFF” in this case, the picture may not
appear.

p

EURO AV OUT

Selects the methods of outputting video signals from the
EURO AV 1(RGB)–TV connectors on the rear panel of the
player.
• VIDEO: outputs the video signals.
• S VIDEO: outputs the S video signals.
• RGB: outputs the RGB signals.

Notes

• When you set “COMPONENT OUT” to “ON”,  you cannot set

“EURO AV OUT” to “RGB.”

• If your TV is not conformed to the S video or the RGB signals,

no picture appears on the TV screen even if you select “S
VIDEO” or “RGB.”  Refer to the instructions supplied with
your TV.

• If your TV has only one EURO AV IN connector, do not select

“S VIDEO.”

p

AUTO PLAY

Selects the setting of Auto Play when you connect the AC
power cord to the AC outlet.
• OFF: does not use “TIMER,” “DEMO1“ or “DEMO2” to

start playing.