![background image](/i/zyxel/148838/zyxel-gs2200-24p/h/zyxel-gs2200-24p-100.png)
Chapter 9 VLAN
GS2200-24 User’s Guide
100
*
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all
ports. Use this row first to set the common settings and then make
adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you
make them.
Control
Select Normal for the port to dynamically join this VLAN group using
GVRP. This is the default selection.
Select Fixed for the port to be a permanent member of this VLAN group.
Select Forbidden if you want to prohibit the port from joining this VLAN
group.
Tagging
Select TX Tagging if you want the port to tag all outgoing frames
transmitted with this VLAN Group ID.
Add
Click Add to save your changes to the Switch’s run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Cancel
Click Cancel to change the fields back to their last saved values.
Clear
Click Clear to start configuring the screen again.
VID
This field displays the ID number of the VLAN group. Click the number to
edit the VLAN settings.
Active
This field indicates whether the VLAN settings are enabled (Yes) or
disabled (No).
Name
This field displays the descriptive name for this VLAN group.
Delete
Click Delete to remove the selected entry from the summary table.
Cancel
Click Cancel to clear the Delete check boxes.
Table 19
Advanced Application > VLAN > Static VLAN (continued)
LABEL
DESCRIPTION