![background image](/i/zyxel/148838/zyxel-gs2200-24p/h/zyxel-gs2200-24p-233.png)
Chapter 25 IP Source Guard
GS2200-24 User’s Guide
233
25.6 ARP Inspection Status
Use this screen to look at the current list of MAC address filters that were created
because the Switch identified an unauthorized ARP packet. When the Switch
identifies an unauthorized ARP packet, it automatically creates a MAC address
filter to block traffic from the source MAC address and source VLAN ID of the
unauthorized ARP packet. To open this screen, click Advanced Application > IP
Source Guard > ARP Inspection.
Figure 121
ARP Inspection Status
The following table describes the labels in this screen.
Table 71
ARP Inspection Status
LABEL
DESCRIPTION
Total number of
filters
This field displays the current number of MAC address filters that were
created because the Switch identified unauthorized ARP packets.
Index
This field displays a sequential number for each MAC address filter.
MAC Address
This field displays the source MAC address in the MAC address filter.
VID
This field displays the source VLAN ID in the MAC address filter.
Port
This field displays the source port of the discarded ARP packet.
Expiry (sec)
This field displays how long (in seconds) the MAC address filter
remains in the Switch. You can also delete the record manually
(Delete).
Reason
This field displays the reason the ARP packet was discarded.
MAC+VLAN: The MAC address and VLAN ID were not in the binding
table.
IP: The MAC address and VLAN ID were in the binding table, but the
IP address was not valid.
Port: The MAC address, VLAN ID, and IP address were in the binding
table, but the port number was not valid.
Delete
Select this, and click Delete to remove the specified entry.