Инструкция для ZYXEL GS2200-24P

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

Chapter 4 The Web Configurator

GS2200-24 User’s Guide

Advanced Application
VLAN

This link takes you to screens where you can configure port-based or
802.1Q VLAN (depending on what you configured in the Switch Setup
menu). You can also configure a protocol based VLAN or a subnet based
VLAN in these screens.

Static MAC
Forwarding

This link takes you to a screen where you can configure static MAC
addresses for a port. These static MAC addresses do not age out.

Static
Multicast
Forwarding

This link takes you to a screen where you can configure static multicast
MAC addresses for port(s). These static multicast MAC addresses do not
age out.

Filtering

This link takes you to a screen to set up filtering rules.

Spanning Tree
Protocol

This link takes you to screens where you can configure the RSTP/MRSTP/
MSTP to prevent network loops.

Bandwidth
Control

This link takes you to a screen where you can configure bandwidth limits
on the Switch.

Broadcast
Storm Control

This link takes you to a screen to set up broadcast filters.

Mirroring

This link takes you to screens where you can copy traffic from one port
or ports to another port in order that you can examine the traffic from
the first port without interference.

Link
Aggregation

This link takes you to screens where you can logically aggregate physical
links to form one logical, higher-bandwidth link.

Port
Authentication

This link takes you to a screen where you can configure IEEE 802.1x port
authentication for clients communicating via the Switch.

Port Security

This link takes you to screens where you can activate MAC address
learning and set the maximum number of MAC addresses to learn on a
port.

Classifier

This link takes you to a screen where you can configure the Switch to
group packets based on the specified criteria.

Policy Rule

This link takes you to a screen where you can configure the Switch to
perform special treatment on the grouped packets.

Queuing
Method

This link takes you to a screen where you can configure queuing with
associated queue weights for each port.

Multicast

This link takes you to screens where you can configure various multicast
features, IGMP snooping and create multicast VLANs.

AAA

This link takes you to a screen where you can configure authentication,
authorization services via external servers. The external servers can be
either RADIUS (Remote Authentication Dial-In User Service) or
TACACS+ (Terminal Access Controller Access-Control System Plus).

IP Source
Guard

This link takes you to screens where you can configure filtering of
unauthorized DHCP and ARP packets in your network.

Loop Guard

This link takes you to a screen where you can configure protection
against network loops that occur on the edge of your network.

Layer 2
Protocol
Tunneling

This link takes you to a screen where you can configure L2PT (Layer 2
Protocol Tunneling) settings on the Switch.

Table 5

Navigation Panel Links (continued)

LINK

DESCRIPTION