![background image](/i/zyxel/148838/zyxel-gs2200-24p/h/zyxel-gs2200-24p-054.png)
Chapter 5 Initial Setup Example
GS2200-24 User’s Guide
54
1
Click Advanced Application > VLAN in the navigation panel and click the Static
VLAN link.
2
In the Static VLAN screen,
select ACTIVE, enter a
descriptive name in the Name
field and enter 2 in the VLAN
Group ID field for the VLAN2
network.
Note: The
VLAN Group ID
field in this screen and the
VID
field in the
IP Setup
screen refer to the same VLAN ID.
3
Since the VLAN2 network is connected to port 1 on the Switch, select Fixed to
configure port 1 to be a permanent member of the VLAN only.
4
To ensure that VLAN-unaware devices (such as computers and hubs) can receive
frames properly, clear the TX Tagging check box to set the Switch to remove
VLAN tags before sending.
5
Click Add to save the settings to the run-time memory. Settings in the run-time
memory are lost when the Switch’s power is turned off.