Chapter 25 IP Source Guard
GS2200-24 User’s Guide
235
25.8 ARP Inspection Log Status
Use this screen to look at log messages that were generated by ARP packets and
that have not been sent to the syslog server yet. To open this screen, click
Advanced Application > IP Source Guard > ARP Inspection > Log Status.
Figure 123
ARP Inspection Log Status
The following table describes the labels in this screen.
Reply
This field displays the total number of ARP Reply packets received
from the VLAN since the Switch last restarted.
Forwarded
This field displays the total number of ARP packets the Switch
forwarded for the VLAN since the Switch last restarted.
Dropped
This field displays the total number of ARP packets the Switch
discarded for the VLAN since the Switch last restarted.
Table 72
ARP Inspection VLAN Status
LABEL
DESCRIPTION
Table 73
ARP Inspection Log Status
LABEL
DESCRIPTION
Clearing log status
table
Click Apply to remove all the log messages that were generated by
ARP packets and that have not been sent to the syslog server yet.
Total number of
logs
This field displays the number of log messages that were generated
by ARP packets and that have not been sent to the syslog server yet.
If one or more log messages are dropped due to unavailable buffer,
there is an entry called overflow with the current number of
dropped log messages.
Index
This field displays a sequential number for each log message.
Port
This field displays the source port of the ARP packet.
VID
This field displays the source VLAN ID of the ARP packet.
Sender MAC
This field displays the source MAC address of the ARP packet.
Sender IP
This field displays the source IP address of the ARP packet.