Chapter 8 Basic Setting
GS2200-24 User’s Guide
76
8.3 General Setup
Use this screen to configure general settings such as the system name and time.
Click Basic Setting > General Setup in the navigation panel to display the
screen as shown.
Figure 40
Basic Setting > General Setup
The following table describes the labels in this screen.
Threshold This field displays the percentage tolerance of the voltage with which the
Switch still works.
Status
Normal indicates that the voltage is within an acceptable operating range
at this point; otherwise Error is displayed.
Table 9
Basic Setting > System Info (continued)
LABEL
DESCRIPTION
Table 10
Basic Setting > General Setup
LABEL
DESCRIPTION
System Name
Choose a descriptive name for identification purposes. This name
consists of up to 64 printable characters; spaces are allowed.
Location
Enter the geographic location of your Switch. You can use up to 32
printable ASCII characters; spaces are allowed.
Contact
Person's Name
Enter the name of the person in charge of this Switch. You can use up to
32 printable ASCII characters; spaces are allowed.