Chapter 39 Troubleshooting
GS2200-24 User’s Guide
330
1
Make sure you understand the normal behavior of the LED. See
2
Check the hardware connections. See
.
3
Inspect your cables for damage. Contact the vendor to replace any damaged
cables.
4
Disconnect and re-connect the power adaptor or cord to the Switch.
5
If the problem continues, contact the vendor.
39.2 Switch Access and Login
I forgot the IP address for the Switch.
1
The default IP address is 192.168.1.1.
2
Use the console port to log in to the Switch.
3
If this does not work, you have to reset the device to its factory defaults. See
I forgot the username and/or password.
1
The default username is admin and the default password is 1234.
2
If this does not work, you have to reset the device to its factory defaults. See
I cannot see or access the
Login
screen in the web configurator.
1
Make sure you are using the correct IP address.
• The default IP address is
192.168.1.1
.
• If you changed the IP address, use the new IP address.