![background image](/i/zyxel/144895/zyxel-zywall-2-ee/h/zyxel-zywall-2-ee-306.png)
ZyWALL 2 Series User’s Guide
17-20
Remote Management Screens
17.12 Configuring TELNET
Click
REMOTE MGNT
to open the
TELNET
screen.
Figure 17-19 Telnet
The following table describes the labels in this screen.
Table 17-3 Telnet
LABEL DESCRIPTION
Server Port
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access
Select the interface(s) through which a computer may access the ZyWALL using this
service.
Secure Client IP
Address
A secure client is a “trusted” computer that is allowed to communicate with the
ZyWALL using this service.
Select
All
to allow any computer to access the ZyWALL using this service.
Choose
Selected
to just allow the computer with the IP address that you specify to
access the ZyWALL using this service.
Apply
Click
Apply
to save your customized settings and exit this screen.
Reset
Click
Reset
to begin configuring this screen afresh.