![background image](/i/zyxel/144895/zyxel-zywall-2-ee/h/zyxel-zywall-2-ee-405.png)
ZyWALL 2 Series User’s Guide
Remote Node Setup
26-7
26.3 Edit IP
Move the cursor to the
Edit IP
field in menu 11.1, then press
[SPACE BAR]
to select
Yes
. Press
[ENTER]
to open
Menu 11.3 - Network Layer Options
.
Figure 26-4 Menu 11.3: Remote Node Network Layer Options for Ethernet Encapsulation
This menu displays the
My WAN Addr
field for
PPPoE
and
PPTP
encapsulations and
Gateway IP Addr
field for
Ethernet
encapsulation. The following table describes the fields in this screen.
Table 26-4 Remote Node Network Layer Options Menu Fields
FIELD
DESCRIPTION
EXAMPLE
IP Address
Assignment
If your ISP did not assign you an explicit IP address, press [SPACE BAR]
and then [ENTER] to select
Dynamic
; otherwise select
Static
and enter
the IP address & subnet mask in the following fields.
Dynamic
(default)
(Rem) IP
Address
If you have a Static IP Assignment, enter the IP address assigned to you
by your ISP.
(Rem) IP
Subnet Mask
If you have a Static IP Assignment, enter the subnet mask assigned to
you.
Gateway IP
Addr
This field is applicable to
Ethernet
encapsulation only. Enter the gateway
IP address assigned to you if you are using a static IP address.
Menu 11.3 - Remote Node Network Layer Options
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Addr= N/A
Network Address Translation= SUA Only
Metric= 1
Private=
RIP Direction= None
Version= N/A
Multicast= None
Enter here to CONFIRM or ESC to CANCEL: