Инструкция для ZYXEL ZyWALL 2 EE

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

ZyWALL 2 Series User’s Guide

3-12

Wizard

Setup

Table 3-6 Wizard 3

LABEL

DESCRIPTION

Remote IP Subnet

Mask

Enter the gateway IP subnet mask (if your ISP gave you one) in this field if you
selected

Use Fixed IP Address

. This field is only available when you select

PPTP encapsulation in the previous wizard screen.

Gateway/Remote IP

Address

Enter the gateway IP address in this field if you selected

Use Fixed IP

Address

. This field is not available when you select PPPoE encapsulation in

the previous wizard screen.

System DNS Servers (if applicable)
DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice
versa. The DNS server is extremely important because without it, you must know the IP address of a
machine before you can access it. The ZyWALL uses a system DNS server (in the order you specify here)
to resolve domain names for VPN, DDNS and the time server.

First DNS Server

Second DNS Server

Third DNS Server

Select

From ISP

if your ISP dynamically assigns DNS server information (and

the ZyWALL's WAN IP address). The field to the right displays the (read-only)
DNS server IP address that the ISP assigns.

Select

User-Defined

if you have the IP address of a DNS server. Enter the

DNS server's IP address in the field to the right.

Select

None

if you do not want to configure DNS servers. If you do not

configure a system DNS server, you must use IP addresses when configuring
VPN, DDNS and the time server.

WAN MAC Address

The MAC address field allows you to configure the WAN port's MAC Address by
either using the factory default or cloning the MAC address from a computer on
your LAN.

Factory Default

Select this option to use the factory assigned default MAC Address.

Spoof this Computer's

MAC address - IP

Address

Select this option and enter the IP address of the computer on the LAN whose
MAC you are cloning. Once it is successfully configured, the address will be
copied to the rom file (ZyNOS configuration file). It will not change unless you
change the setting or upload a different rom file. It is advisable to clone the
MAC address from a computer on your LAN even if your ISP does not presently
require MAC address authentication.

Back

Click

Back

to return to the previous screen.

Finish

Click

Finish

to complete and save the wizard setup.

3.5 Basic Setup Complete

Well done! You have successfully set up your ZyWALL to operate on your network and access the Internet.