![background image](/i/zyxel/144895/zyxel-zywall-2-ee/h/zyxel-zywall-2-ee-384.png)
ZyWALL 2 Series User’s Guide
24-4
LAN Setup
Table 24-2 LAN TCP/IP Setup Menu Fields
FIELD
DESCRIPTION
EXAMPLE
TCP/IP Setup:
IP Address
Enter the IP address of your ZyWALL in dotted decimal notation
192.168.1.1
(default)
IP Subnet Mask
Your ZyWALL will automatically calculate the subnet mask based
on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the ZyWALL.
255.255.255.0
RIP Direction
Press [SPACE BAR] and then [ENTER] to select the RIP direction.
Options are:
Both
,
In
Only
,
Out Only
or
None
.
Both
(default)
Version
Press [SPACE BAR] and then [ENTER] to select the RIP version.
Options are:
RIP-1
,
RIP-2B
or
RIP-2M
.
RIP-1
(default)
Multicast
IGMP (Internet Group Multicast Protocol) is a session-layer
protocol used to establish membership in a Multicast group. The
ZyWALL supports both IGMP version 1 (
IGMP-v1
) and version 2
(
IGMP-v2
). Press [SPACE BAR] and then [ENTER] to enable IP
Multicasting or select
None
(default) to disable it.
None
Edit IP Alias
The ZyWALL supports three logical LAN interfaces via its single
physical Ethernet interface with the ZyWALL itself as the gateway
for each LAN network. Press [SPACE BAR] to select
Yes
and
then
press [ENTER] to display menu 3.2.1
Yes
When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm…] to save
your configuration, or press [ESC] at any time to cancel.
24.4.1 IP Alias Setup
IP alias allows you to partition a physical network into different logical networks over the same Ethernet
interface. The ZyWALL supports three logical LAN interfaces via its single physical Ethernet interface with
the ZyWALL itself as the gateway for each LAN network.