![background image](/i/zyxel/144895/zyxel-zywall-2-ee/h/zyxel-zywall-2-ee-469.png)
ZyWALL 2 Series User’s Guide
System Information and Diagnosis
32-11
Figure 32-10 WAN & LAN DHCP
The following table describes the diagnostic tests available in menu 24.4
for your ZyWALL and associated
connections.
Table 32-4 System Maintenance Menu Diagnostic
FIELD DESCRIPTION
Ping Host
Enter 1 to ping any machine (with an IP address) on your LAN or WAN.
Enter its IP address in the
Host IP Address
field below.
WAN DHCP Release
Enter 2 to release your WAN DHCP settings.
WAN DHCP Renewal
Enter 3 to renew your WAN DHCP settings.
Internet Setup Test
Enter 4 to test the Internet setup. You can also test the Internet setup in
Menu 4 - Internet Access
. Please refer to the
Internet Access
chapter for
more details. This feature is only available for dial-up connections using
PPPoE or PPTP encapsulation.
Reboot System
Enter 11 to reboot the ZyWALL.
Host IP Address=
If you entered 1 in
Ping Host
, then enter the IP address of the computer
you want to ping in this field.
Enter the number of the selection you would like to perform or press [ESC] to cancel.