ZyWALL 2 Series User’s Guide
WAN Screens
6-3
Figure 6-1
WAN Setup: Route
The following table describes the fields in this screen.
Table 6-3 WAN Setup: Route
LABEL DESCRIPTION
WAN
Traffic
Redirect
Dial Backup
The default WAN connection is "1” as your broadband connection via the WAN port
should always be your preferred method of accessing the WAN. The default priority of
the routes is
WAN
,
Traffic Redirect
and then
Dial Backup
:
You have two choices for an auxiliary connection (
Traffic Redirect
and
Dial Backup
) in
the event that your regular WAN connection goes down. If
Dial Backup
is preferred to
Traffic Redirect
, then type "14" in the
Dial Backup
Priority (metric)
field (and leave the
Traffic Redirect
Priority (metric)
at the default of "15").
Apply
Click
Apply
to save your changes back to the ZyWALL.
Reset
Click
Reset
to begin configuring this screen afresh.
6.5 Configuring WAN ISP
To change your ZyWALL’s WAN ISP settings, click
WAN
, then the
WAN ISP
tab.
The screen differs by the
encapsulation.
6.5.1 Ethernet Encapsulation
The screen shown next is for
Ethernet
encapsulation.