![background image](/i/zyxel/144895/zyxel-zywall-2-ee/h/zyxel-zywall-2-ee-047.png)
ZyWALL 2 Series User’s Guide
Wizard Setup
3-1
Chapter 3
Wizard Setup
This chapter provides information on the Wizard Setup screens in the web configurator.
3.1 Wizard Setup Overview
The web configurator’s setup wizard helps you configure your device to access the Internet. The second
screen has three variations depending on what encapsulation type you use. Refer to your ISP checklist in the
Quick Start Guide
to know what to enter in each field. Leave a field blank if you don’t have that information.
3.2 General Setup and System Name
General Setup
contains administrative and system-related information.
System Name
is for identification
purposes. However, because some ISPs check this name you should enter your computer's "Computer
Name".
•
In Windows 95/98 click
Start
,
Settings
,
Control Panel
,
Network
. Click the Identification tab, note the
entry for the
Computer Name
field and enter it as the
System Name
.
•
In Windows 2000, click
Start
,
Settings
and
Control Panel
and then double-click
System
. Click the
Network Identification
tab and then the
Properties
button. Note the entry for the
Computer name
field and enter it as the
System Name
.
•
In Windows XP, click
Start
,
My Computer
,
View system information
and then click the
Computer
Name
tab. Note the entry in the
Full computer name
field and enter it as the ZyWALL
System Name
.
3.2.1 Domain Name
The
Domain Name
entry is what is propagated to the DHCP clients on the LAN. If you leave this blank, the
domain name obtained by DHCP from the ISP is used. While you must enter the host name (System Name),
the domain name can be assigned from the ZyWALL via DHCP.
Click
Next
to configure the ZyWALL for Internet access.