Инструкция для ZYXEL ZyWALL 2 EE

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

ZyWALL 2 Series User’s Guide

LAN Setup

24-7

Figure 24-8 Menu 3.5: Wireless LAN Setup

The settings of all client stations on the wireless LAN must match those of the

ZyWALL.

Follow the instructions in the next table on how to configure the wireless LAN parameters.

Table 24-4 Menu 3.5: Wireless LAN Setup

FIELD

DESCRIPTION

EXAMPLE

Enable
Wireless LAN

Press [SPACE BAR] to select

Yes

to turn on the wireless LAN. The

wireless LAN is off by default. Configure wireless LAN security features
such as Mac filters and 802.1X before you turn on the wireless LAN.

(default)

ESSID

(Extended Service Set IDentification) The ESSID identifies the AP to
which the wireless stations associate. Wireless stations associating to
the Access Point must have the same ESSID. Enter a descriptive name
(up to 32 characters) for the wireless LAN.

Wireless

Hide ESSID

Press [SPACE BAR] to select

Yes

to hide the ESSID in the outgoing

beacon frame so a station cannot obtain the ESSID through passive
scanning.

(default)

Channel ID

This allows you to set the operating frequency/channel depending on
your particular region. Use the [SPACE BAR] to select a channel.

CH01 2412

MHz

RTS
Threshold

(Request To Send) The threshold (number of bytes) for enabling
RTS/CTS handshake. Data with its frame size larger than this value will
perform the RTS/CTS handshake. Setting this attribute to be larger than
the maximum MSDU (MAC service data unit) size turns off the RTS/CTS
handshake. Setting this attribute to zero turns on the RTS/CTS
handshake. Enter a value between

and

2432

2432

(default)

Menu 3.5 - Wireless LAN Setup

Enable Wireless LAN= No

ESSID= Wireless

Hide ESSID= No

Channel ID= CH01 2412MHz

RTS Threshold= 2432
Frag. Threshold= 2432

WEP= Disable

Default Key= N/A