When installing the supplied 64MB memory card, see "
10. Turn on the printer.
11. Make sure the optional duplex module is properly installed.
a. Press
Menu
.
b. Press until
Configure
appears, and then press or .
c. Press until
Reports
appears, and then press or .
d.
Printer Settings
is displayed. Press .
The Printer Settings page is printed.
e. Verify that the optional duplex module is listed under
Printer Options
in the Printer Settings page.
If the optional duplex module is not listed, turn off the printer, unplug the power cable, and reinstall the optional
duplex module.
f. Verify the
Memory Capacity
under
General
in the Printer Settings page.
12. Update your driver by following the instructions. If the printer is on a network, update the driver for each client.
Windows XP/Server 2003
1. Click
Start
®
Printers and Faxes
.
2. Right-click this printer icon and select
Properties
.
3. Click the
Options
tab, and then select
Get Information from Printer
.
4. Click
Apply
, and then click
OK
.
5. Close the
Printers and Faxes
folder.
Windows 2000/NT4.0
1. Click
Start
®
Settings
®
Printers
.
2. Right-click this printer icon and select
Properties
.
3. Click the
Options
tab, and then select
Get Information from Printer
.
4. Click
Apply
, and then click
OK
.
5. Close the
Printers
folder.