Web

59

Wi-Fi

You can connect your device to the Internet using Wi-Fi.
To use Wi-Fi on your device, you need access to a wireless point or “hotspot” 

within a distance of up to 300 feet (100 meters).

NOTE: 

The range and quality of the Wi-Fi signal is affected by the number of 

connected devices, infrastructure, and objects through which the signal passes.

To turn on Wi-Fi and connect to a network

1

Touch the Home button 



 Menu button 



Settings



Wireless 

controls



Wi-Fi

 to select the Wi-Fi check box. The device scans for 

available wireless networks.

2

Touch 

Wi-Fi settings

. The network names and security settings (

Open 

network

 or 

Secured with WEP/WPA/WPA2

/

WPS

) of discovered Wi-Fi 

networks display in the 

Wi-Fi networks

 list.

3

Flick the list and touch to select a Wi-Fi network to connect to.

4

Enter a password (if necessary), then touch 

Connect

 to connect to the Wi-

Fi network.

NOTE: 

To connect to a network protected by Wired Equivalent Privacy (WEP), WPA 

(Wi-Fi Protected Access), WPA2, or WPS (Wireless Protected Setup), you must 

enter the WEP/WPA/WPA2/WPS security key to obtain authorized access to the 

network. The next time your device connects to a previously accessed secured 

wireless network, you will not be asked to enter the WEP/WPA/WPA2/WPS key 

again, unless you reset your device to its factory default settings.

NOTE: 

Your device has the ability to maintain a constant web connection through 

Wi-Fi or mobile networks (GPRS, EDGE, 3G, or HSPA). However, Wi-Fi connection 

has priority over mobile network connection if both are available.

bk0_en.book  Page 59  Sunday, May 30, 2010  12:34 PM