GENERAL SAFETY PRECAUTIONS

6 – English

Before using a new chain saw

•

Please read this manual carefully.

•

Check that the cutting equipment is correctly fitted and 
adjusted. See instructions under the heading 
Assembly.

•

Refuel and start the chain saw. See the instructions 
under the headings Fuel Handling and Starting and 
Stopping.

•

Do not use the chain saw until sufficient chain oil has 
reached the chain. See instructions under the heading 
Lubricating cutting equipment.

•

Long-term exposure to noise can result in permanent 
hearing impairment. So always use approved hearing 
protection.

Important

Always use common sense

It is not possible to cover every conceivable situation you 
can face when using a chain saw. Always exercise care 
and use your common sense. Avoid all situations which 
you consider to be beyond your capability.  If you still feel 
uncertain about operating procedures after reading these 
instructions, you should consult an expert before 
continuing. Do not hesitate to contact your dealer or us if 
you have any questions about the use of the chain saw. 
We will willingly be of service and provide you with advice 
as well as help you to use your chain saw both efficiently 
and safely. Attend a training course in chain saw usage if 
possible. Your dealer, forestry school or your library can 

!

WARNING! Under no circumstances may 
the design of the machine be modified 
without the permission of the 
manufacturer. Always use genuine 
accessories. Non-authorized 
modifications and/or accessories can 
result in serious personal injury or the 
death of the operator or others.

!

WARNING! A chain saw is a dangerous 
tool if used carelessly or incorrectly and 
can cause serious, even fatal injuries. It 
is very important that you read and 
understand the contents of this 
operator’s manual.

!

WARNING! The inside of the muffler 
contain chemicals that may be 
carcinogenic. Avoid contact with these 
elements in the event of a damaged 
muffler.

!

WARNING! Long term inhalation of the 
engine’s exhaust fumes, chain oil mist 
and dust from sawdust can represent a 
health risk.

!

WARNING! The ignition system of this 
machine produces an electromagnetic 
field during operation. This field may 
under some circumstances interfere with 
pacemakers. To reduce the risk of 
serious or fatal injury, we recommend 
persons with pacemakers to consult 
their physician and the pacemaker 
manufacturer before operating this 
machine.

IMPORTANT!

The machine is only designed for cutting wood.

You should only use the saw with the bar and chain 
combinations we recommend in the chapter Technical 
data.

Never use the machine if you are fatigued, while under 
the influence of alcohol or drugs, medication or anything 
that could affect your vision, alertness, coordination or 
judgement.

Wear personal protective equipment. See instructions 
under the heading Personal protective equipment.

Do not modify this product or use it if it appears to have 
been modified by others.

Never use a machine that is faulty. Carry out the checks, 
maintenance and service instructions described in this 
manual. Some maintenance and service measures 
must be carried out by trained and qualified specialists. 
See instructions under the heading Maintenance.

Never use any accessories other than those 
recommended in this manual. See instructions under 
the headings Cutting equipment and Technical data.

CAUTION! Always wear protective glasses or a face 
visor to reduce the risk of injury from thrown objects. A 
chain saw is capable of throwing objects, such as wood 
chips, small pieces of wood, etc, at great force. This can 
result in serious injury, especially to the eyes.

!

WARNING! Running an engine in a 
confined or badly ventilated area can 
result in death due to asphyxiation or 
carbon monoxide poisoning.

!

WARNING! Faulty cutting equipment or 
the wrong combination of bar and saw 
chain increases the risk of kickback! 
Only use the bar/saw chain combinations 
we recommend, and follow the filing 
instructions. See instructions under the 
heading Technical  data.