PANORAMIC SUNSHADE (if so
equipped)
The panoramic sunshade operates when the ig-
nition switch is in the ON position. The sunshade
switch is located near the roof console. When
opening or closing the sunshade the switch need
not be held.
To open the sunshade:
●
To fully open the sunshade, push the switch
䊊
1
toward the open position.
To close the sunshade:
●
To fully close the sunshade, push the switch
䊊
2
toward the close position.
WARNING
●
To avoid personal injury, keep your
hands, fingers and head away from the
sunshade arm, the arm rail and sun-
shade inlet port.
●
Do not allow children near the rear sun-
shade system. They could be injured.
●
Do not place objects on or near the rear
sunshade. This could cause improper
operation or damage it.
●
Do not pull or push the rear sunshade.
This could cause improper operation or
damage it.
CAUTION
●
Do not place objects (such as newspa-
pers, handkerchiefs, etc.) on the sun-
shade inlet port. Doing so may entangle
these objects in the sunshade when it is
extending or retracting, causing im-
proper operation or damage to the
sunshade.
●
Do not push the sunshade arm with
your hands, etc., as this may deform it.
Improper operation or damage to the
sunshade may result.
●
Do not put any object into the sunshade
inlet port as this may result in improper
operation or damage the sunshade.
●
Do not hang any object on the arm rail
as this may result in improper operation
or damage the sunshade.
●
Do not forcefully pull the sunshade. Do-
ing so may elongate the sunshade. Im-
proper operation or damage to the sun-
shade may result.
LIC2228
2-54
Instruments and controls