1. Vehicle-to-vehicle distance control mode
2. Conventional (fixed speed) cruise control
mode
Push the CRUISE ON/OFF switch
䊊
A
to choose
the cruise control mode between the vehicle-to-
vehicle distance control mode
䊊
1
and the con-
ventional (fixed speed) cruise control mode
䊊
2
.
To choose the vehicle-to-vehicle distance control
mode
䊊
1
, quickly push and release the CRUISE
ON/OFF switch
䊊
A
. To choose the conventional
(fixed speed) cruise control mode
䊊
2
, push and
hold the CRUISE ON/OFF switch
䊊
A
for longer
than approximately 1.5 seconds.
Once a control mode is activated, it cannot be
changed to the other cruise control mode. To
change the mode, push the CRUISE ON/OFF
switch once to turn the system off. Then push the
CRUISE ON/OFF switch again to turn the sys-
tem back on and select the desired cruise control
mode.
Always confirm the setting in the Intelligent
Cruise Control system display.
For the vehicle-to-vehicle distance control mode,
see the following description. The conventional
(fixed speed) cruise control mode, see “Conven-
tional (fixed speed) cruise control mode”.
SELECTING THE VEHICLE-TO-
VEHICLE DISTANCE CONTROL
MODE
To choose the vehicle-to-vehicle distance control
mode
䊊
1
, quickly push and release the CRUISE
ON/OFF switch
䊊
A
.
VEHICLE-TO-VEHICLE DISTANCE
CONTROL MODE
In the vehicle-to-vehicle distance control mode,
the Intelligent Cruise Control (ICC) system auto-
matically maintains a selected distance from the
vehicle traveling in front of you according to that
vehicle’s speed (up to the set speed), or at the
set speed when the road ahead is clear.
With ICC, the driver can maintain the same
speed as other vehicles without the constant
need to adjust the set speed as you would with a
normal cruise control system.
LSD2118
5-50
Starting and driving