Инструкция для INFINITI JX35 (2013)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

When driving in areas using road salt or other
corrosive materials, check lubrication frequently.

Lights*

Clean the headlights on a regular basis.

Make sure that the headlights, stop lights, tail
lights, turn signal lights, and other lights are all
operating properly and installed securely. Also
check headlight aim.

Road wheel nuts (lug nuts)*

When checking

the tires, make sure no wheel nuts are missing,
and check for any loose wheel nuts. Tighten if
necessary.

Tire rotation*

Tires should be rotated every

7,500 miles (12,000 km).

Tires*

Check the pressure with a gauge often

and always prior to long distance trips. If neces-
sary, adjust the pressure in all tires, including the
spare, to the pressure specified. Check carefully
for damage, cuts or excessive wear.

Tire Pressure Monitoring System (TPMS)
transmitter components

Replace the TPMS

transmitter grommet seal, valve core and cap
when the tires are replaced due to wear or age.

Wheel alignment and balance

If the vehicle

should pull to either side while driving on a
straight and level road, or if you detect uneven or
abnormal tire wear, there may be a need for wheel

alignment. If the steering wheel or seat vibrates at
normal highway speeds, wheel balancing may be
needed.

●

For additional information regarding tires,
refer to “Important Tire Safety Information”
(US) or “Tire Safety Information” (Canada) in
the Warranty Information Booklet.

Windshield

Clean the windshield on a regular

basis. Check the windshield at least every six
months for cracks or other damage. Have a dam-
aged windshield repaired by a qualified repair
facility.

Windshield wiper blades*

Check for cracks or

wear if they do not wipe properly.

Inside the vehicle

The maintenance items listed here should be
checked on a regular basis, such as when per-
forming periodic maintenance, cleaning the ve-
hicle, etc.

Additional information on the following
items with an “*” is found later in this sec-
tion.

Accelerator pedal

Check the pedal for smooth

operation and make sure the pedal does not bind
or require uneven effort. Keep the floor mat away
from the pedal.

Brake pedal

Check the pedal for smooth opera-

tion. If the brake pedal suddenly goes down fur-
ther than normal, the pedal feels spongy or the
vehicle seems to take longer to stop, see an
INFINITI retailer immediately. Keep the floor mat
away from the pedal.

Brakes

Check that the brakes do not pull the

vehicle to one side when applied.

Continuously Variable Transmission (CVT)
P (Park) position mechanism

On a fairly

steep hill check that your vehicle is held securely
with the shift selector in the P (Park) position
without applying any brakes.

Parking brake

Check the parking brake opera-

tion regularly. The vehicle should be securely held
on a fairly steep hill with only the parking brake
applied. If the parking brake needs adjustment,
see an INFINITI retailer.

Seats

Check seat position controls such as seat

adjusters, seatback recliner, etc. to ensure they
operate smoothly and all latches lock securely in
every position. Check that the head restraints and
headrests move up and down smoothly and the
locks (if so equipped) hold securely in all latched
positions.

Seat belts

Check that all parts of the seat belt

system (for example, buckles, anchors, adjusters
and retractors) operate properly and smoothly,

Maintenance and do-it-yourself

8-3