●
Do not use wax on the camera lens. Wipe off
any wax with a clean cloth that has been
dampened with a mild detergent diluted with
water.
With the ignition switch in the ON position, press
the CAMERA button or move the shift selector to
the R (Reverse) position to operate the Around
View Monitor. The monitor displays various views
of the position of the vehicle.
Available views:
●
Bird-Eye View
The surrounding view of the vehicle from
above.
●
Front-Side View
The view around and ahead of the front
passenger’s side wheel.
●
Front View
An approximately 150-degree view of the
front of the vehicle.
●
Front-Wide View
An approximately 180-degree view of the
front of the vehicle.
●
Rearview
An approximately 150-degree view of the
rear of the vehicle.
●
Rear-Wide View
An approximately 180-degree view of the
rear of the vehicle.
The system is designed as an aid to the driver in
situations such as slot parking or parallel parking.
There are some areas where the system will not
show objects. When in the front or rearview
display, an object below the bumper or on the
ground may not be viewed
䊊
1
. When in the
bird-eye view, a tall object near the seam of the
camera viewing areas will not appear in the moni-
tor
䊊
2
.
SAA3160
AROUND VIEW® MONITOR (if so
equipped)
4-36
Monitor, climate, audio, phone and voice recognition systems