Инструкция для INFINITI JX35 (2013)

(скачивание инструкции бесплатно)

Формат файла: PDF

Доступность: Бесплатно как и все руководства на сайте. Без регистрации и SMS.

Дополнительно: Чтение инструкции онлайн

NOTE:

●

The BSI system will not operate if your ve-
hicle is on a lane marker when another ve-
hicle enters the detection zone. In this case
only the BSW system operates.

●

BSI braking will not operate or will stop
operating and only a warning chime will
sound under the following conditions.

– When the brake pedal is depressed.

– When the accelerator pedal is depressed

while brake control assist is provided.

– When steering quickly.

– When the ICC, DCA, FCW or IBA warn-

ings sound.

– When the hazard warning flashers are

operated.

– When driving on a curve at a high speed.

RADAR MAINTENANCE

The two radar sensors for the BSW, BSI and BCI
systems are located near the rear bumper. Al-
ways keep the area near the radar sensors clean.

The radar sensors may be blocked by temporary
ambient conditions such as splashing water, mist
or fog.

The blocked condition may also be caused by
objects such as ice, frost or dirt obstructing the
radar sensors.

Check for and remove objects obstructing the
area around the radar sensors.

Do not attach stickers (including transparent ma-
terial), install accessories or apply additional
paint near the radar sensors.

Do not strike or damage the area around the
radar sensors. Consult an INFINITI retailer if the
area around the radar sensors is damaged due to
a collision.

Lane camera maintenance

For information of camera maintenance, see
“Lane camera unit maintenance” in this section.

Sonar sensor maintenance

For information of sonar sensor maintenance, see
“Sensor maintenance” in the this section.

Radio frequency statement

This device complies with part 15 of the FCC
Rules and RSS-310 of Industry Canada.

Operation is subject to the following two condi-
tions:

1. This device may not cause harmful interfer-

ence.

2. This device must accept any interference

received, including interference that may
cause undesired operation.

Frequency of operation: 24.05GHz — 24.25GHz

Field Strength: Not greater than 2.5V/m peak
(0.25V/m average) at a distance of 3 m.

The manufacturer is not responsible for any radio
or TV interference caused by unauthorized modi-
fications to this equipment. Such modification s
could void the user’s authority to operate the
equipment.

LSD2051

5-46

Starting and driving