HOW TO SWITCH THE DISPLAY
With the ignition switch in the ON position, press
the CAMERA button or move the shift selector to
the R (Reverse) position to operate the Around
View Monitor.
The Around View Monitor can display two split
view as well as a single view of the front-wide
view or rear-wide view. Select the “Change View”
key to switch between the available views.
If the shift selector is not in the R (Reverse)
position, the available views are:
●
Front-view/bird-eye view split screen
●
Front-view/front-side view split screen
●
Front-wide view
If the shift selector is in the R (Reverse) position,
the available views are:
●
Rearview/bird-eye view split screen
●
Rearview/front-side view split screen
●
Rear-wide view
When the shift selector is in the D (Drive) position
and the screen does not display the Around View
Monitor and the sonar detection distance is be-
coming short, the screen displays the front-
view/bird-eye view. In that case, when the SW
䊊
1
is selected or when the sonar does not detect any
objects, the monitor will display the previous
screen.
When the shift selector is not in the R (Reverse)
position and the vehicle speed increases above
approximately 6 mph (10 km/h), the screen
changes from the Around View Monitor screen to
the previous screen.
CAMERA AIDING SONAR (parking
sensor) (rear center sonar if so
equipped)
The sonar (parking sensor) sounds a tone to
inform the driver of obstacles near the bumper.
WARNING
●
The sonar (parking sensor) is a conve-
nience feature. It is not a substitute for
proper parking.
●
The driver is always responsible for
safety
during
parking
and
other
maneuvers.
LHA2319
LHA2320
4-44
Monitor, climate, audio, phone and voice recognition systems