Setting ECO pedal reaction force:
1. Press the SETTING
䊊
1
button and select
“ECO DRIVE” on the display using the
INFINITI controller. Then press the ENTER
䊊
2
button.
2. Select “ECO pedal” and press the ENTER
䊊
2
button.
3. To set the reaction force of the ECO pedal
system, select “Standard” or “Soft”.
4. To turn off the ECO pedal system, select
“OFF”, select “ON” and press the ENTER
䊊
2
button. When the ECO pedal system is
tuned off, the accelerator will operate nor-
mally.
The Lane Departure Warning (LDW) system/
Lane Departure Prevention (LDP) system will op-
erate when the vehicle is driven at speeds of
approximately 45 MPH (70 km/h) and above, and
when it is traveling close to either the left or the
right of a traveling lane.
Each system functions as follows:
●
Lane Departure Warning (LDW) system
– warns the driver with a warning light and
chime that the vehicle is beginning to
leave the driving lane.
LHA2152
LHA2155
LSD2016
LANE DEPARTURE WARNING (LDW)
SYSTEM/ LANE DEPARTURE PREVENTION
(LDP) SYSTEM (if so equipped)
Starting and driving
5-23