![background image](/i/infiniti/147975/infiniti-m35-2009/h/infiniti-m35-2009-120.png)
PROGRAMMING HOMELINK
姞
To program your HomeLink
姞
Transceiver to op-
erate a garage door, gate, or entry door opener,
home or office lighting, you need to be at the
same location as the device. Note: Garage door
openers (manufactured after 1996) have “rolling
code protection”. To program a garage door
opener equipped with “rolling code protection”;
you will need to use a ladder to get up to the
garage door opener motor to be able to access
the “smart or learn” program button.
1. To begin, push and hold the 2 outer
HomeLink
姞
buttons (to clear the memory)
until the indicator light
䊊
A
blinks (after 20
seconds). Release both buttons.
2. Position the end of the hand-held trans-
mitter 1 to 3 in (20 to 70 mm) away from
the HomeLink
姞
surface.
3. Using both hands, simultaneously push
and hold both the HomeLink
姞
button you
want to program and the hand-held trans-
mitter button.
DO NOT release the buttons until step 4 has
been completed.
SIC3612
SIC3613
2-52
Instruments and controls
췽
—
—
05/23/08—pattie
墍