![background image](/i/infiniti/147975/infiniti-m35-2009/h/infiniti-m35-2009-254.png)
Activating Standard Mode
When the Alternate Command Mode is active,
perform the following steps to switch to the
Standard Mode.
1. Push the
SETTING
button on the instru-
ment panel.
2. Highlight the “Others” key on the display
and then push the
ENTER
button.
3. Highlight the “Voice Recognition” key and
then push the
ENTER
button.
4. Highlight the “Alternate Command Mode”
key and push the
ENTER
button.
5. The indicator turns off and the Standard
Mode activates.
Displaying user guide
If you use the INFINITI Voice Recognition system
for the first time or you do not know how to
operate it, you can display the User Guide for
confirmation.
You can confirm how to use voice commands by
accessing a simplified User Guide, which con-
tains basic instructions and tutorials for several
voice commands.
1. Push the
INFO
button on the instrument
panel.
2. Highlight the “Others” key using the
INFINITI controller and push the
ENTER
button.
3. Highlight the “Voice Recognition” key us-
ing the INFINITI controller and push the
ENTER
button.
4. Highlight the “User Guide” key using the
INFINITI controller and push the
ENTER
button.
5. Highlight an item using the INFINITI con-
troller and push the
ENTER
button.
You can skip steps 1 to 3 above if you say
“Help”.
SAA1815
SAA1917
SAA2164
4-100
Monitor, climate, audio, phone and voice recognition systems
췽
—
—
05/23/08—pattie
墍