![background image](/i/infiniti/147975/infiniti-m35-2009/h/infiniti-m35-2009-372.png)
Check the fluid level in the reservoir.
The fluid level should be checked using the HOT
range (
䊊
1
: HOT MAX.,
䊊
2
: HOT MIN.) at fluid
temperatures of 122 to 176°F (50 to 80°C) or
using the COLD range (
䊊
3
: COLD MAX.,
䊊
4
:
COLD MIN.) at fluid temperatures of 32 to 86°F
(0 to 30°C).
If the fluid is below the MIN line, add Genuine
NISSAN PSF or equivalent. Remove the cap and
fill through the opening.
CAUTION
●
Do not overfill.
●
Use Genuine NISSAN PSF or equivalent.
For further brake fluid information, see “CAPACI-
TIES AND RECOMMENDED FUEL/LUBRICANTS” in
the “9. Technical and consumer information”
section of this manual.
WARNING
●
Use only new fluid from a sealed container.
Old, inferior or contaminated fluid may dam-
age the brake system. The use of improper
fluids can damage the brake system and af-
fect the vehicle’s stopping ability.
●
Clean the filler cap before removing.
●
Brake fluid is poisonous and should be
stored carefully in marked containers out of
the reach of children.
CAUTION
Do not spill the fluid on any painted surfaces.
This will damage the paint. If fluid is spilled,
wash the surface with water.
BRAKE FLUID
Check the fluid level in the reservoir. If the fluid
is below the MIN line
䊊
2
or the brake warning
light comes on, add Genuine NISSAN Super
Heavy Duty Brake Fluid or equivalent
DOT 3
fluid
up to the MAX line
䊊
1
. If fluid must be added
frequently, the system should be checked by an
INFINITI dealer.
SDI1765A
SDI1828
POWER STEERING FLUID
BRAKE FLUID
8-16
Maintenance and do-it-yourself
췽
—
—
09/03/08—tbrooks
墍