and release it. (The CRUISE SET indicator will
illuminate in the instrument panel.) Take your
foot off the accelerator pedal. Your vehicle will
maintain the set speed.
●
To pass another vehicle,
depress the accel-
erator pedal. When you release the pedal,
the vehicle will return to the previously set
speed.
●
The vehicle may not maintain the set speed
on winding or hilly roads. If this happens,
drive without the cruise control.
To cancel the preset speed,
use one of the
following methods:
a) Push the CANCEL switch. The SET indica-
tor light will turn off.
b) Tap the brake pedal. The SET indicator
light will turn off.
c) Turn the MAIN switch off. Both the CRUISE
and SET indicator lights will turn off.
●
If you depress the brake pedal while pushing
the RESUME/ACCELERATE or SET/COAST
switch and reset at the cruising speed, the
cruise control will disengage. Turn the MAIN
switch off once and then turn it on again.
●
The cruise control will automatically cancel if
the vehicle slows more than 8 MPH (12
km/h) below the set speed.
●
If you move the selector lever to the N
(Neutral) position, the cruise control will be
canceled.
To reset at a faster cruising speed,
use one of
the following methods:
●
Depress the accelerator pedal. When the
vehicle attains the desired speed, push and
release the SET/COAST switch.
●
Push and hold the RESUME/ACCELERATE
switch. When the vehicle attains the desired
speed, release the switch.
●
Push,
then
quickly
release
the
RESUME/ACCELERATE switch. Each time you
do this, the set speed will increase by about
1 MPH (1.6 km/h).
To reset at a slower cruising speed,
use one of
the following methods:
●
Lightly tap the brake pedal. When the ve-
hicle attains the desired speed, push the
SET/COAST switch and release it.
●
Push and hold the SET/COAST switch. Re-
lease the switch when the vehicle slows
down to the desired speed.
●
Push, then quickly release the SET/COAST
switch. Each time you do this, the set speed
will decrease by about 1 MPH (1.6 km/h).
To resume the preset speed,
push and release
the RESUME/ACCELERATE switch. The vehicle
will resume the last set cruising speed when the
vehicle speed is over 25 MPH (40 km/h).
5-24
Starting and driving
췽
—
—
05/24/08—pattie
墍