![background image](/i/infiniti/147975/infiniti-m35-2009/h/infiniti-m35-2009-042.png)
6. Check to make sure the child restraint is
properly secured prior to each use. If the
child restraint is loose, repeat steps 4
through 5.
CHILD RESTRAINT INSTALLATION
USING THE SEAT BELTS
WARNING
●
Even with the INFINITI Advanced Air Bag Sys-
tem, never install a rear-facing child re-
straint in the front passenger seat. Front air
bags inflate with great force. A rear-facing
child restraint could be struck by the front air
bag in a crash and could seriously injure or
kill your child.
●
INFINITI recommends that child restraints be
installed in the rear seat. However, if you
must install a front-facing child restraint in
the front passenger seat, move the passen-
ger seat to the rearmost position. Also, be
sure the front passenger air bag status light
is illuminated to indicate the passenger air
bag is OFF. See “Front passenger air bag and
status light” later in this section for details.
●
The three-point seat belt in your vehicle is
equipped with an Automatic Locking Retrac-
tor (ALR) mode which must be used when
installing a child restraint.
●
Failure to use the ALR mode will result in the
child restraint not being properly secured.
The restraint could tip over or otherwise be
unsecured and cause injury to the child in a
sudden stop or collision. Also, it can change
the operation of the front passenger air bag.
See “Front passenger air bag and status
light” later in this section.
●
A child restraint with a top tether strap
should not be used in the front passenger
seat.
The instructions in this section apply to child
restraint installation using the vehicle seat
belts in the rear seat or the front passenger
seat.
SSS0100
1-24
Safety — Seats, seat belts and supplemental restraint system
췽
—
—
05/23/08—pattie
墍