![background image](/i/infiniti/147975/infiniti-m35-2009/h/infiniti-m35-2009-147.png)
Adjusting outside mirrors
The outside mirror control switch is located at
the lower part of the instrument panel.
The outside mirror will operate only when the
ignition switch is in the ACC or ON position.
Move the switch right
䊊
1
or left
䊊
2
to select the
right or left side mirror, then adjust
䊊
3
using
the control switch.
Defrosting outside mirrors (if so
equipped)
The outside mirrors will be heated when the
rear window defroster switch is operated. (See
“REAR WINDOW AND OUTSIDE MIRROR DE-
FROSTER SWITCH” in the “2. Instruments and
controls” section.)
Foldable outside mirrors
Fold the outside mirror by pushing it toward the
rear of the vehicle.
Reverse tilt-down feature
When backing up the vehicle, the right or left
outside mirror will turn downward automatically
to provide better rear visibility.
1. Push the ignition switch to the ON posi-
tion.
2. Move the selector lever to the R (Reverse)
position.
3. Choose the right or left outside mirror by
operating
the
outside
mirror
control
switch.
4. The
selected
outside
mirror
surface
moves downward.
When one of the following conditions has oc-
curred, the selected outside mirror surface will
return to its original position.
●
The selector lever is moved to any position
other than R (Reverse).
●
The outside mirror control switch is set to
the center position.
●
The ignition switch is pushed to the LOCK
position.
For more information regarding this feature and
how to save the R (Reverse) mirror tilt-down
adjustment in the automatic drive positioner
memory, see “Automatic drive positioner” later
in this section.
SPA1829
Pre-driving checks and adjustments
3-25
췽
—
—
05/23/08—pattie
墍