![background image](/i/infiniti/147975/infiniti-m35-2009/h/infiniti-m35-2009-041.png)
4. For child restraints that are equipped with
webbing-mounted attachments, remove
any additional slack from the anchor at-
tachments. Press downward and rearward
firmly in the center of the child restraint
with your hand to compress the vehicle
seat cushion and seatback while tighten-
ing the webbing of the anchor attach-
ments.
5. After attaching the child restraint, test it
before you place the child in it. Push it
from side to side while holding the seat
near the LATCH attachment path. The
child restraint should not move more than
1 inch (25 mm) from side to side. Try to tug
it forward and check to see if the LATCH
attachment holds the restraint in place. If
the restraint is not secure, tighten the
LATCH attachment as necessary, or put
the restraint in another seat and test it
again. You may need to try a different
child restraint. Not all child restraints fit in
all types of vehicles.
Rear-facing (rigid-mounted) — step 3
SSS0649
Rear-facing — step 4
SSS0639
Rear-facing — step 5
SSS0650
Safety — Seats, seat belts and supplemental restraint system
1-23
췽
—
—
08/12/08—pattie
墍