![background image](/i/infiniti/147975/infiniti-m35-2009/h/infiniti-m35-2009-076.png)
reaches “E”. There will be a small reserve of fuel
in the tank when the fuel gauge needle reaches
“E”.
The
indicates that the fuel-filler door is
located on the passenger’s side of the vehicle.
CAUTION
●
If the vehicle runs out of fuel, the
malfunction indicator light (MIL) may come
on. Refuel as soon as possible. After a few
driving trips, the
light should turn off.
If the light remains on after a few driving
trips, have the vehicle inspected by an
INFINITI dealer.
●
For additional information, see “Malfunction
Indicator Light (MIL)” later in this section.
METER/RING ILLUMINATION AND
NEEDLE SWEEP
The ring illumination surrounding meters and
gauges illuminates when the driver’s door is
closed after getting into the vehicle with the
Intelligent Key carried in.
When the engine is started, the indicator
needles will sweep in the speedometer and
tachometer and the ring illumination will be
brightened gradually.
Meter illumination control knob
The meter illumination control knob
䊊
1
oper-
ates when the headlight switch is in the AUTO
(not lighting) or OFF position with the ignition
switch in the ON position.
To adjust the brightness of the meters, push the
control knob several times until the desired
brightness is achieved.
To turn the ring illumination and needle sweep
on and off, push the control knob and hold it for
1 second.
SIC3610
2-8
Instruments and controls
췽
—
—
05/23/08—pattie
墍