![background image](/i/infiniti/147975/infiniti-m35-2009/h/infiniti-m35-2009-038.png)
3. Secure the tether strap to tether anchor
bracket that provides the straightest in-
stallation.
4. Tighten the strap according to the manu-
facturer’s instructions to remove any
slack.
If you have any questions when installing a top
tether strap child restraint on the rear seat, con-
sult your INFINITI dealer for details.
CHILD RESTRAINT INSTALLATION
USING LATCH
WARNING
●
Attach LATCH system compatible child re-
straints only at the locations shown. For the
LATCH lower anchor locations, see “Lower
Anchors and Tethers for CHildren SYSTEM
(LATCH)” earlier in this section. If a child
restraint is not secured properly, your child
could be seriously injured or killed in an
accident.
●
The LATCH anchors are designed to with-
stand only those loads imposed by correctly
fitted child restraints. Under no circum-
stance are they to be used for adult seat
belts or harnesses.
●
Inspect the lower anchors by inserting your
fingers into the lower anchor area and feel-
ing to make sure there are no obstructions
over the LATCH anchors, such as seat belt
webbing or seat cushion material. The child
restraint will not be secured properly if the
LATCH anchors are obstructed.
Front-facing
Follow these steps to install a front-facing child
restraint using LATCH system:
1. If your vehicle is equipped with rear power
seat adjustment, adjust the rear outboard
seats to the upright and rearmost posi-
tion. (See “REAR SEATS” earlier in this
section.)
2. Position the child restraint on the seat.
Always follow the child restraint manufac-
turer’s instructions.
3. Secure the child restraint anchor attach-
ments to the LATCH lower anchors. Check
to make sure the LATCH attachment is
properly attached to the lower anchors.
Front-facing (webbing-mounted) — step 3
SSS0645
1-20
Safety — Seats, seat belts and supplemental restraint system
췽
—
—
05/23/08—pattie
墍