![background image](/i/zelmer/152113/zelmer-13z011/h/zelmer-13z011-216.png)
216
16. Programming
When the appliance is ready to use (the message
READY TO BREW
appears on the display) press the
(E)
MENU (OK)
button once. The coffee maker will start to operate in the programming mode. The button will light after pressing it. The dis-
play will show the menu with the following messages:
ECONOMY MODE,
LANGUAGE
,
TEMPERATURE
,
PREBREWING
,
PRESOAKING
,
WATER HARDN.
,
DESCALING
,
NO. OF CUPS
,
CLOCK
,
DEFAULT
.
To select the desired setting press the button
(D)
or
(F)
until the appropriate setting appears on the display. When
the symbol appears before the message, the selection of the desired function is con
fi
rmed. E.g.
TEMPERATURE
.
To con
fi
rm the selection of this function press the
(E)
MENU (OK)
button, the coffee maker will operate in the temperature
setting mode. Use the buttons
(D)
or
(F)
to rewind the submenu, con
fi
rm the selection of the function using the but-
ton
(E)
MENU (OK)
.
When the symbol * appears on the right side, the given program has been set.
Press the
(C)
(ESC)
button to exit the programming mode.
NOTE: You can press the (C) (ESC) at any time to stop programming without saving the changes. To save the
changes press the (E)
MENU (OK) button.
16.1. Setting the energy saving function – ECONOMY MODE
The appliance has an energy saving function which allows for a lower energy consumption when the coffee maker is used
irregularly. This function switches on after a set period of time (
default setting: 1 hour
). The time setting can be changed
in 15 minute intervals. The maximum setting time is 12 hours, the minimum setting time is 0 minutes.
The appliance is ready to use when the message
READY TO BREW
appears on the display. Proceed according to the
algorithm below.
The countdown to the switch on of the energy saving mode starts with the appliance test process or a different activity such
as brewing coffee or preparing hot water or steam. The appliance cannot start operating in the energy saving mode until
the set time has not elapsed and the heating element has not stopped operating.
The user can set the economy mode immediately. When the appliance is ready to use the message
READY TO BREW
appears on the display. Proceed according to the algorithm below.
To return from the economy mode to the normal mode, press any button on the control panel once, the message
ECONOMY
COFFEE
will appear on the display. After reaching the appropriate temperature, the message
READY TO BREW
will
appear on the display.
ATTENTION!
The time necessary to return from the energy saving mode to the ready mode is strictly connected to the
period of the stand-by mode (the switch off of the coffee maker heating element). The longer the coffee maker remains in
the
ECONOMY MODE,
the longer the time necessary to reach the optimal temperature.