![background image](/i/zyxel/148838/zyxel-gs2200-24p/h/zyxel-gs2200-24p-030.png)
Chapter 2 Hardware Installation and Connection
GS2200-24 User’s Guide
30
2.3.1 Rack-mounted Installation Requirements
• Two mounting brackets.
• Eight M3 flat head screws and a #2 Philips screwdriver.
• Four M5 flat head screws and a #2 Philips screwdriver.
Failure to use the proper screws may damage the unit.
2.3.1.1 Precautions
• Make sure the rack will safely support the combined weight of all the equipment
it contains.
• Make sure the position of the Switch does not make the rack unstable or top-
heavy. Take all necessary precautions to anchor the rack securely before
installing the unit.
2.3.2 Attaching the Mounting Brackets to the Switch
1
Position a mounting bracket on one side of the Switch, lining up the four screw
holes on the bracket with the screw holes on the side of the Switch.
Figure 5
Attaching the Mounting Brackets
2
Using a #2 Philips screwdriver, install the M3 flat head screws through the
mounting bracket holes into the Switch.
3
Repeat steps
to install the second mounting bracket on the other side of
the Switch.
4
You may now mount the Switch on a rack. Proceed to the next section.